Name: ATF2 weekly meeting
Start: 2008-10-08T14:30:00+09:00
End: 2008-10-08T16:30:00+09:00
Location: No location set

- 14:30 → 15:30
  International phone/webex meeting
  - 14:30
    Reproducibility of multi-pole components at the final doublet (QD0 and QF1 ) 20m
    
    The reproducibility is very important at installation of S-band BPMs, when the magnets are split into two halves and reassembled. The multipole components are very sensitive to growth of beam size at IP. After the installation, it is difficult to measure distances of gaps between pole tips with enough accuracy. The BPMs will be installed on 14th October in the magnets.
    
    Speaker: Dr Cherrill Spencer (SLAC)
    
    Slides
    
    a question on the effect of the multi-pole field 15m
    
    Why the "tuning" is not very effective to the multi-pole field? 1 Does the tuning include multi-pole (non linear, strength of sextupole) knobs? 2 Is the tuning simulation done only without multi-pole fields? Then add multi-pole after the tuning? Or, Is the tuning simulation done with multi-pole fields ?
    
    Speaker: Dr Kiyoshi Kubo (KEK)
    
    Answer
    
    Slides
  - 14:50
    
    QM7 errors and matching in extraction 20m
    
    Speaker: Dr Mauro Pivi (SLAC)
    
    Slides
  - 15:10
    
    Rematch DR & EXT Optics for QM7R Gradient Error 20m
    
    Speaker: Mark Woodley (SLAC)
    
    Slides
- 15:30 → 16:30
  KEK site meeting (Japanese)
  - 15:30
    
    Progress of Shintake monitor work 20m
    
    Speakers: Mr Masahiro OROKU (Tokyo Univ.), Mr Takashi Yamanaka (The University of Tokyo)